Click here to see similar items on eBay, and to buy.
Onstep Telescope Controller – Built And Working , autostar goto. Condition is “New”. (Built to sell)Stm32 onstep controller (clone CS32) tested as seen here-:https://youtube.com/shorts/39ffdnzttrU
Board comes complete except the focus driver. It is set to run on 12v and the regulator is set to 5v .You will need a good power supply for this , I use a 4 amp at least . It comes with two LV8729 drivers for axis 1 and 2 set to a vref of 0.9A .It is flashed with latest stable Onstep 3.16 , it flashes through the serial pins (usb on the board) and goes into flash mode (some clones dont go into flash mode).This set up is what I run on my EQ5 with 400 step NEMA 17 0.9A motors.If purchasing this please be aware that you will have to program it and use a configuration that you generate for your own set up , this is not going to work unless you can set it up . Any questions please ask and go to the Onstep Wiki for more info.https://onstep.groups.io/g/main/wiki/6408
Click here to buy, and to see similar items on eBay
Category: Cameras and Photography:Telescopes and Binoculars:Telescope Parts and Accessories:Other Telescope Parts
Location: Stoke-on-Trent